Видео

Hi dear. Ds1202z can be upgrade??

Props!

how much current/temperature did you used to melt down the wax?

I’ve been using my little Bosch IXO ( the original mark 1) for 16 years now, and it’s still working great. Very good for screwing together flat pack furniture/ racking, car underbody trays, car door panels, bumpers etc. I may replace it with another IXO, if it ever breaks.

I’m clearly slow to the party ! Interesting video though. I’m actually working out how to connect a zoom f1 and senhesier ek100 together (for my dad a long story!) so am not familiar with the zoom - and don’t have it handy to try stuff, wondering if I can use my Senheiser radio lav system (like you’re got there - an ek100 g3) use the Senheiser remotely - and connect the Senheiser receiver into the line in of the zoom. I’m head scratching as to what cable I need- if I can get one off the shelf with the right screw locks. And in anticipation understand what happens when recording via line in - presumably ideally I’d have a cable that connects left and right of the input of the f1 to the Senheiser output to create a mono same left and right recording … if you want to monitor the lav recording from the f1, through earphones and get the sound coming to both ears whilst monitoring from the f1 …

I hope they were cryo treated for at least six months..

Amazing, I will be back , Thank you

It is ok if i use SU650?

I have been waiting for this print from him for over 2 years, and you put it in a Hobby Lobby frame.... Whoosh... I would love to buy that print from you :)

hi i would like to ask how you manage to add echo to each microphone using this Xenyx 1202 mixer?

that is not a full spectrum what I see or my screen has a terrible color cast.

Oh was the metal shielding to prevent x rays?

Учи РУССКИЙ МОГУЧИЙ ЯЗЫК - мудак!

Did not work for me, it nearly worked drum at 135C bearing at -8. It went half way in an jammed. I read all the warnings about micro racking, and chickened. If I have to do it again I will go for 200C on the drum.

Stupid free energy

Can you tell me what those round pieces are and what they do?

I followed this meticulously. The SSD I put in shows up but has no drive letter and I can't access it. I am unable to format it also. Anyone know what the fix is? Thanks in advance!

Hey there! I need some help with regards to a project which is similar to what you did in video.

Any idea on how to control the motor via RC controller ?

Kill the music, it's quite annoying.

Thank you, i broke two lamp holder not knowing how to unlock it

@Made 2 Hack how do you switch between f and c and know which one your on??? I just got mine and im confused on what temp its on

I'm pretty sure "full spectrum" as it is used here is a marketing gimmick term. You can't get full spectrum from a single color temperature. And, unless this COB is magic, you can't put two different color temperatures in the same COB driver without two different COB modules. "Full spectrum" is a marketing term that China uses to try and sell products to marijuana farmers. I'd be happy to hear your explanation for why you used the term "full spectrum" here, and if you can prove me wrong, I'll happily admit it. But i own one of these LEDs, and there is nothing 'full spectrum' about it. Please try to avoid parroting generic meaningless marketing terms, because then all you're doing is 1) confusing \ misleading noobs 2) helping China sell products with incorrect applications \ functions to people who don't know any better

That music prove you stupid

I plan on getting this before Christmas to begin soldering as it seems no one in my area really offers it for game console repair (a lot of broken HDMI ports around lol) and simple game battery replacements for GBC, GBA, NES, SNES & N64 games. Are you still using this 2 years later? I see a lot of good reviews on it an it doesnt seem to bad as long as you take care of it an get new tips

Just found your channel and Subscribed. Nice work

You are an idiot

Hello Great video!!! I have a lamp holder similar to your one with a two-core cable that is broken. I want to replace it with a three-core cable. Do I simple attach the earth to the screw? If so how do I keep it secure while in place? Regards Embee

Is the hack still works?

Hi, I bought one of these about 6 months ago to be able to reflow SMD components. Thanks for the video, it’s a good honest review and it looks like I made a decent choice. I’ve been soldering through hole for 30+ years but am new to SMD. What would you recommend as a basic setting for temperature and fan speed? New subscriber, looking forward to watching some of your other videos.

tnx!!!

Congratulations. By hand sanding all the surfaces you destroyed the vise. It may look better, but all the possible perpendicularities and parallelisms are gone. Now it is good for cutting 2x4s by hand, but only if you don't want to make exact cuts ;-)

Stupid video. He,he, overunity! My ass.

It says illigal key

I decided to buy this station. Tnx 4 video. Keep up good work!

You can re-calibrate the thermometer if you hold the up and down button of each tool.

I bought a 6" Chinese vice for two reasons, it will probably outlive me and it was cheap, I don't need a fancy expensive engineering vice that will last 6 generations. It needs some tidying up work, but hey-ho, what doesn't nowadays.

This is all just a scam since the hack depends on the version of firmware but it is never available for current versions of the firmware that anyone actually has! It's just a scheme to sell more scopes by releasing rumors and fake videos saying they can be hacked but then after buying it you will find the mythical hack is never actually available!

The old IXO models were much better than the last few. Moving the direction toggle onto the top is a dealbreaker, having to change hand position is incredibly annoying - e.g. if you are fine tuning something like a door hinge with numerous direction changes needed, the on top design is incredibly frustrating.

why my laptop can't boot from ssd ?

Nice...! I like it..!👍👍👍

How thick are the boards? 7/16" or 3/4"?

Sadly this is not what i was looking for. This does not show how to electrically connect all those breadboards together which is what they have in classrooms. The 3m ones are electrically connected so not to waste slots on cables to connect the 3 or more boards.

Worked for me today, 4/4/23 on a brand new one I got off amazon. Thanks dude!

Does anyone know how can I dissolve these carbon electrodes?

This contains some of the most annoying background music I've ever heard.

I own a rigol 1054z oscilloscope. I've been trying to upgrade or hack it, but was unsuccessful. Can anyone that has this oscilloscope help me in hacking my scope.tried in three occasion, but was unsuccessful. I really want to convert it from 50 MHz to a 100 MHz scope. I tried to generate my scope information, but nothing happened. Can it be that this is an outdated website? Or if is outdated, can anyone send me the updated website?

Thanks for creating this content. What materials, mix ratios, and make of epoxy used on the first mix? Thanks again!

Nice overview. Been wanting one of these to do some SMD capacitor replacement on my old Macintosh machines. I’m experienced with thru hole soldering but never tried hot air rework. Looks easy enough, and this unit doesn’t break the bank. Good stuff.

Still works in Feb. 2023. The latest firmware is from 2021 so this will still work on any 1054Z made at least until they update the firmware again. As others have said, scopes from around 2020 onward have all the trial options shown here included free. You now only need the DSEA option (the 500uV option is not hardware-supported so no point having it as it could cause problems).